Perlite
Approximate pH: 7.0–7.5 in a water extract. The value depends on the batch and the measurement method.
Perlite is expanded volcanic glass. The rock is crushed and rapidly heated to about 900–1000 °C. The water inside the particles turns to steam, so the material expands in volume and becomes light and porous.
Its job in a substrate
Perlite creates air pores, reduces the density of a mix, and helps free water drain away faster. It is useful in peat and coir mixes that compact or take a long time to dry. Some moisture remains on the surface and in the pores of the granules, but perlite's main role is structural, not nutritional.
How much to add
The share is given as a proportion of the volume of the finished mix:
- 10–20% — a light adjustment to an already loose base;
- 20–30% — for dense peat or coir;
- 30–50% — for rooting and very airy mixes;
- up to 100% — only in separate rooting setups with controlled moisture.
For large plants the share is reduced: a light pot becomes unstable. In a small container, particles that are too large leave voids around fine roots.
Limitations and preparation
Perlite can float, migrate to the surface, and break up when mixed vigorously. Its dust fills pores and irritates the airways, so the dry material is lightly moistened or rinsed before working with it. Construction-grade perlite is not used unless its composition has been confirmed.