How to Choose and Combine Components

A substrate is not put together by the number of ingredients or from a universal recipe. Each component must do a clear job: hold water, keep air spaces, maintain the structure, or take part in nutrition.

Assess the conditions first

The same composition works differently in a small pot and a large one, on a warm, bright plant stand and on a cool windowsill. Before choosing components, take into account:

Someone who waters often usually needs a more stable coarse structure. If plants regularly dry out, the water reserve can be increased, but only with materials suited to the particular roots.

Base, structure, and water reserve

Peat or coir can serve as an organic base. In a mineral system there may be no separate organic base at all.

Bark, coir chips, perlite, pumice, lava, foam glass, and expanded clay form the structure. At the same time porous particles also hold water, so a coarse grade does not always mean fast drying.

Sphagnum, vermiculite, fine coir, diatomite, and some clay granules increase the water reserve. Their share is matched to the size of the pot and how fast moisture is used.

Why the grade matters

The grade is the particle size. Thick roots and large containers usually allow a coarser framework. Fine roots and small pots need good contact with a moist surface, so the particles are chosen smaller, but without excess dust.

Fine particles fill the gaps between coarse ones. If a few stones are added to peat or coir with a lot of dust, the mix will not necessarily become airy. Assess the structure of the whole moistened mix, not each dry component separately.

How to put a mix together

  1. Decide whether an organic base is needed.
  2. Choose a stable framework that suits the roots.
  3. Adjust the water reserve to the microclimate and watering.
  4. Take into account which components take part in ion exchange.
  5. Determine the nutrition system separately.
  6. Mix a small trial batch and moisten it completely.

After watering, check how evenly it wets, how the free water drains, how much dust is in the runoff, and the state of the mix a few days later. The recipe is written down with the grade and measurable proportions.

Common mistakes

A good substrate can consist of just two or three well-chosen materials. A complicated composition is not an advantage in itself.